STANDARD TERMS AND CONDITIONS OF SALE

3PB Solutions LLC’s products are sold commercially for multiple applications as determined by the end-user. Information on certain physical properties of our various styles and grades is provided in our product literature, but such information is unrelated to any particular use or application. Each purchaser or user of a product must initially determine its suitability for the intended application, use or purpose by appropriate and adequate testing, engineering and chemical analysis. Consultation with qualified engineers and testing laboratories is recommended. 3PB Solutions LLC does not recommend any of its products for any particular use or application. The purchaser or user shall assume full responsibility for the adequacy and suitability for the intended use. Products may fail as a result of temperature variances, excessive pressures, abrasion or damaging substances. The wear life of products is limited by the circumstances and conditions of use. Rubber materials should be inspected regularly and should be replaced as appropriate for operational and safety requirements and the prevention of injury or damage to persons and property.

All of our products, except where indicated, are a proprietary blend of various polymers to meet various specifications. Please be aware that the named polymer is not necessarily the polymer representing the highest percentage of the polymer blend. The various specification call outs are a valuable guide in selecting the type and grade of rubber for a particular application. In any application, the customer should evaluate the performance requirements and conditions that will affect the working life of the rubber product. Where appropriate, field testing may need to be performed before the type of sheet rubber is selected. If the customer’s quality assurance incorporates the testing of rubber material, the test criteria should include the physical property call outs of the ASTM specification that are most critical to its application. Polymer type alone may not be adequate for the selecting of the rubber that is best suited for a specific application.

ASTM basic requirements for physical properties are based on values obtained from standard laboratory test specimens prepared and tested in accordance with the applicable ASTM test methods. Test results from specimens prepared from finished products may not duplicate values obtained from standard test specimens. Per ASTM D2000, Section 7.1, Buyer agrees that when standard test specimens are cut from finished parts in accordance with Practice D 3183, a deviation to the extent of 10% on tensile strength and elongation values is permissible.

Customer Supplied Material – If a customer supplies materials that we use as part the production process, we are responsible only for the services we directly provide on the project.  If we make an error on a project, our responsibility is limited to the work we provide directly to the product.  For example, if material is supplied and we make a programming error, we can not be held responsible for the cost of your material.

  1. PAYMENTS: Seller may require full or partial payment in advance at any time if in its sole judgment, the financial condition of the Buyer does not justify the terms of payment specified herein. A charge of 1-1/2 percent (1-1/2%) per month (or at the highest rate permitted by law) shall be payable on all overdue accounts. Orders will not be processed until payment terms are approved by Seller’s Credit Department.
  2. PRICES SUBJECT TO CHANGE: Seller may change any price, shipment or freight term in effect at any time and from time to time without prior notice thereof. Buyer’s failure to give Seller a written objection to any such change within three (3) days after receipt of notice shall constitute acceptance of such change. Where objection is made, Seller shall advise Buyer within ten (10) days thereafter whether Seller will (a) continue to deliver at the price or on the terms in effect prior to the announced change, or (b) cancel this contract. Any cancellation shall be effective upon Buyer’s receipt of Seller’s notice and shall be without further obligation of either party to the other except to perform or pay all obligations accrued through date of cancellation. Provided however, that in the case of non-stock items ordered specifically for Buyer’s use, Seller reserves the right to increase prices to cover the increases in its costs arising from increases in the cost of materials or labor rates which become effective between the date of this acknowledgment and the date of shipment. In such event, this Agreement shall remain in effect at the price adjusted to reflect said increases.
  3. MINIMUM PURCHASE: Stock, Non-stock and Custom items: Please request quote.
  4. TAXES: Buyer shall reimburse Seller for all taxes, excises or other charges which Seller may be required to pay to any governmental entity (national, state or local) upon the sales, production or transportation of the goods sold hereunder.
  5. DELIVERY: Unless otherwise specified herein, goods will be delivered F.O.B. point of shipment, freight allowed on specified pounds. Seller will determine the point of origin of shipment, the method of transportation, and the routing of shipment. Partial deliveries shall be accepted by the Buyer and paid for at the prices and terms hereunder. Seller does not guarantee any delivery or completion date. In the event of delay in delivery of goods, Seller shall not be liable or responsible for any loss, damage, expense or charge of any kind, direct or indirect, suffered or incurred by Buyer as a result of such delay.
  6. TITLE AND RISK OF LOSS: Title and risk of loss in the goods shall pass to Buyer upon Seller’s delivery to carrier at the shipping point, notwithstanding the terms of shipment specified herein.
  7. WARRANTIES AND DISCLAIMERS: Goods furnished under this Agreement shall conform to the description herein. All first quality goods are warranted to be free from defects in material and workmanship at the time of shipment. Seller shall convey good title to buyer. Seller further warrants that the goods sold hereunder do not infringe any valid United States patent, but Seller does not warrant, however, that the use of the goods or products made therefrom, either alone or in conjunction with other materials, will not infringe any valid United States patent. THE WARRANTIES SET FORTH IN THIS PROVISION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. SELLER MAKES NO WARRANTY, EXPRESSED OR IMPLIED, OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. ALL PRODUCTS ARE SOLD AND WARRANTED ONLY PURSUANT TO OUR PUBLISHED TERMS AND CONDITIONS OF SALE. WE ARE NOT RESPONSIBLE TO THE USER FOR ANY CONSEQUENTIAL, INCIDENTAL, OR SPECIAL DAMAGES RESULTING FROM PRODUCT USE OR PROCESSING.
  8. CLAIM PERIOD AND REMEDIES: Prompt written notice shall be given to Seller of any claim of failure of goods to conform to the warranties hereunder. Should any failure to conform to these warranties appear under normal and proper use within the period of three (3) months from the date of shipment to the Buyer, Seller shall correct such nonconformity, at its option, by repair or replacement of the defective goods, or by the refund of the purchase price thereof with due allowance made for the service rendered by the goods returned. In no event shall Buyer commence any action under this Agreement later than three months after receipt of the goods. The remedies provided above are the Buyer’s sole remedies for any failure of Seller to comply with its obligations. Correction of any non-conformity by repair or replacement or by refund of the purchase price of the nonconforming goods (less allowance for use) shall constitute fulfillment of all obligations of Seller with respect thereto, whether the claims of Buyer are based in contract, or tort (including negligence), or otherwise.
  9. LIMITATION OF LIABILITY: Seller shall not be liable in contract, in tort (including negligence),or otherwise for damage or loss of other property, loss of profits or revenue, loss of use of property or equipment, claims of customers of the Buyer, or for any special, indirect, incidental, or consequential damages whatsoever. Under no circumstances shall Seller’s liability exceed the purchase price of the goods in respect of which damages are claimed.
  10. PRODUCTS SUITABILITY AND LENGTH OF SERVICE: Determination of the suitability of the goods for the uses and applications contemplated by Buyer and others shall be the sole responsibility of the Buyer or user. No guaranty is given with respect to length of service on any particular application. Suggestions or recommendations made by Seller in its product literature concerning uses or applications of the goods are believed to be reliable, but Seller makes no warranty or guaranty of results to be obtained since the conditions of the use and application by Buyer and others are beyond Seller’s control.
  11. FORCE MAJEURE: Seller shall not be liable for failure to perform or for delay in performance due to fire, flood, strike or other labor difficulty (Seller shall not be required to settle any labor matter against its own best judgment), act of God, act of any government authority, acts or omissions of the Buyer, riot, embargo, explosion, accident, breakdown of machinery or equipment, shortage of or inability to obtain fuel, power, raw materials, equipment, transportation of the product at usual prices or usual sources, or due to any other cause beyond its reasonable control. Quantities so affected by such circumstances may be eliminated without liability, but this Agreement shall otherwise remain unaffected.
  12. RETURNED GOODS: No goods may be returned without Seller’s prior written authorization. Each request for exchange or return shall describe the condition of the goods and the reasons for the requested return or exchange. If the Seller agrees to accept a return or exchange, the Buyer shall pay return transportation cost and a restocking charge; the restocking charge will be determined based upon the Seller’s ability to resell the exchanged or returned material and the reason for the return.
  13. QUANTITY VARIANCE: The quantity of goods delivered may be within 10% more or less of the quantity specified (20% more or less on made-to-order products) and shall be charged at the unit price herein.
  14. ENTIRE AGREEMENT: This Agreement constitutes the complete and final Agreement of sale and purchase of the goods specified herein and supersedes all prior contracts and discussions. No modification hereof shall be effected by the use of purchase order, acknowledgment, acceptance, or other forms at variance with or in addition to the terms and conditions contained herein. No modification shall be effected in any manner other than in writing and signed by the party claimed to be bound thereby.
  15. GOVERNING LAW: This contract shall be governed by and construed under the laws of the State of California.
  16. TRANSPORTATION POLICY: All deliveries will be made F.O.B. Point of Shipment. Freight will be calculated and billed at the time of shipment.All price page and catalog weights are approximate and actual shipping weights may vary from these listings. In case of dispute, actual shipping weights will apply.Origin, Method of Shipping and Routing: Seller will determine the point of origin of shipment, the method of transportation and the routing of shipment. Purchasers requiring shipment by a method or routing other than that will be billed a premium for transportation and service charges. If Seller elects to ship by other than common carrier, the full transportation charges will be prepaid and any freight and service charges will be calculated and billed.Purchaser Pick Up: No allowance will be made in lieu of transportation if the buyer accepts shipment at the factory or the warehouse or freight station. Transportation charges will not be deducted from the selling price.
  17. CONCEALED DAMAGE:
    Seller will not participate in any settlement of claims for concealed damage. Upon receipt of any shipment, Buyer must unpack immediately and, if damage is discovered, must:

    • Not move the product from the point of examination
    • Retain shipping container and packing material
    • Notify the carrier’s agent to make an inspection and confirm in writing
    • Send Seller a copy of the carrier’s inspection report
    • Make a claim for damage with the carrier
    • Recovery for any damage to merchandise incurred during shipping shall be the sole responsibility of Buyer.

    Any such damage shall not defeat or otherwise affect the obligation of Buyer to pay all amounts due Seller with respect to the damaged goods.

  18. CANCELLATION: Requests for cancellation or modification of orders must be submitted in writing and received by Seller at least 90 days prior to shipment. Any cancellation or modification will be effective only when acknowledged in writing by Seller and can be made subject to status of production of goods. Orders for merchandise produced specifically for a customer cannot be canceled once goods are produced or in process.
  19. ACCEPTANCE OF ORDERS: Issuance of any Catalog or Price List does not constitute an offer for the sale of any products described therein. All orders are subject to the acceptance of Seller. All orders accepted by Seller are accepted on the understanding that Buyer, by placing the order, has agreed to these Standard Terms & Conditions of Sale and that they are therefore part of the Buyer’s order.
  20. NOTICE: All notices, requests, claims and other communications by Buyer with respect to this Agreement or sales hereunder shall be directed to Seller at its executive offices at 8833 Production Avenue San Diego, CA 92121, 855-785-5660.
  21. DISPUTE RESOLUTION, VENUE, AND ATTORNEYS’ FEES: The parties agree to submit any dispute arising out of or relating to this Agreement to independent neutral service Just Resolve LLC (www.justresolve.com), or its successor, for binding neutral-driven, non-adversarial resolution according to its then-current rules, if the amount in controversy, as believed by the parties or Just Resolve, is less than or equal to $250,000.00. If a larger dispute arises, or on that Just Resole does not undertake for any reason, then the parties agree to submit the dispute for binding arbitration administered by the American Arbitration Association.  Either party may commence a matter by requesting it in a written demand delivered to the other party and to the administering service stating the subject of the dispute and the relief requested.  The place of resolution will be online or in San Diego County, California, USA.  The final resolution and the terms of this paragraph shall be enforceable in any court of competent jurisdiction, and the prevailing party shall be entitled to recover its reasonable attorneys fees and costs incurred in such enforcement action, along with all of its fees and costs paid to the service administering the agreed resolution process.
  22. BLANKET ORDERS: Blanket orders are defined as orders for products to be delivered in specific amounts in regular intervals within a twelve (12) month period.   All blanket orders must conform to the following requirements: (1)  blanket orders must have specified release dates and quantities; (2) each release  must meet the minimum release quantity provided by  Seller (3) all parts must ship within  a (12) months from the date of PO receipt; (4)  Pricing will be based upon the total quantity scheduled for release within a twelve (12) month period. (5) the first scheduled release must be within thirty (30) days of the order date.  The balance of parts not released at the end of twelve (12) months will be shipped and billed complete; (8) blanket order  items must be released to one destination;   (6)  Blanket orders for stock, non-stock and custom products are non-cancellable;  (9)  modification of orders must be submitted in writing and received by Seller at least 90 days prior to shipment. Any modification will be effective only when acknowledged in writing by Seller and can be made subject to status of production of goods. Orders for merchandise produced specifically for a customer cannot be modified once goods are produced or in process.